Ten Steps for New Chinese Redwood Furniture ProductionNew Chinese-style mahogany furniture caters to young people's hobbies, so it is very popular among young people. Many friends are curious about the production process of new Chinese mahogany furniture. The following edition will give you a detailed introduction. Step 1: Designing Products Excellent mahogany furniture designers will design products well. Step 2: Choose the right raw materials The woodworker chooses the right red wood material. First of all, look at a red head. How many white skins are there? Are there any borers? In the mahogany market, mahogany is generally divided into three categories: red, yellow and white. Redwood is the national standard mahogany, yellow is the low-end miscellaneous wood such as pine, rubber wood and so on. White refers to wood which is not in the category of national standard mahogany but is very valuable. For example: North American walnut, sandalwood, etc. Step 3: Sawing Wood Production Now that we have chosen the mahogany, we are going to start sawing the wood. This is not a casual operation. In order not to waste, woodworkers will write the sheets. Understand where each piece of wood is handled before sawing begins. Redwood is a scarce resource,raw materials are expensive, try not to waste. Step 4: Air-drying of mahogany In the past, mahogany was naturally airdried, but now it is generally operated by machines. Drying room, dehumidification room, these modern equipment will dry wood moisture, very good to avoid cracking, deformation problems. Step 5. Planing In ancient times, wood was planed with planers. Now there are advanced machine sanders, which can directly make the surface of wood smooth and smooth. Step 6, Tenon Opening Rosewood furniture is tenon-mortise structure, relatively stable. In order to stabilize the structure, there will be no skewed and distorted tenons, which will be damaged in a few days. The advantage of tenon-mortise structure is that the service life can be very long, decades or even hundreds of years will not be bad, but hardware three-in-one connection, up to five years and 10 years, will rust or oxidize out. Step 7: Wood Carving The mahogany furniture has many moires, dragon patterns, Phoenix patterns, or many other beautiful carvings, which are accomplished in this step. This is the most time-consuming step, very testing the skills of the master sculptor. Now most of them are machine engraving, which is time-saving and labor-saving. Step 8. Woodworking Assembly After the above seven steps, the furniture is basically shaped, then it can be spliced and assembled. Step 9: Grinding This step will soon be completed. The new Chinese-style mahogany furniture was polished. In order to paint easily, the polisher needs topolish the edges and corners of the furniture. Step 10. Paint waxing and copper installation Because the density and oiliness of wood are different, the wood will dilute a part after primer is made. In this case, you need to grind it again andthen make the dough. So that's what people often ask, how many times have your furniture been primed and how many sides have been painte? That's the way it is said. Mahogany furniture and solid wood furniture most factories say 3 bottom 2 sides, some small workshops, in order to savelabor, materials, on the bottom side and then shipped, so that the furniture shipped, for a long time, will changecolor or paint dry and astringent.The shelf life is not long. After the above 10 steps, a new set of Chinese-style mahogany furniture has been built successfully. It can be said that every piece of mahogany furniture is the painstaking efforts of craftsmen.
Article classification:
新闻動態
|